Difference between revisions of "Gree"
Jump to navigation
Jump to search
(Created page with "== Connection to Gree VRF System == CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be...") |
|||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | == Connecting to Gree VRF System == |
CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done: | CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done: | ||
| − | * On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find cable going from Outdoor to Indoor(s). The signal wires in this cable are usually BROWN and ORANGE. Near the connector of | + | |
| + | * On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as '''-- A B --'''. Try to find communication cable going from Outdoor to Indoor(s). The signal wires in this cable are usually <span style="color:Brown">BROWN</span> and <span style="color:Orange">ORANGE</span>. Near the connector of this cable on Outdoor PCB where should similar free connector(s) that can be used for CoolMasterNet.<br> | ||
| + | [[File:Gree-Outdoor_PCB1.gif]] | ||
| + | |||
| + | * Wedge into Outdoor-Indoors(s) cable break. Just cut the cable in desired place and wedge into. Make sure to keep wires isolated after such surgery. | ||
| + | * On Indoor Unit. Same way as on Outdoor PCB if additional connector is available. | ||
| + | |||
| + | <!-- | ||
| + | === Connecting to GMV5 DC Inverter VRF Series === | ||
| + | [[File:Gree-GMV5-connection-diagram.jpg]] | ||
| + | --> | ||
Latest revision as of 03:22, 13 March 2017
Connecting to Gree VRF System
CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done:
- On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as -- A B --. Try to find communication cable going from Outdoor to Indoor(s). The signal wires in this cable are usually BROWN and ORANGE. Near the connector of this cable on Outdoor PCB where should similar free connector(s) that can be used for CoolMasterNet.
- Wedge into Outdoor-Indoors(s) cable break. Just cut the cable in desired place and wedge into. Make sure to keep wires isolated after such surgery.
- On Indoor Unit. Same way as on Outdoor PCB if additional connector is available.
