Difference between revisions of "CoolMasterNet FW Update"
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
== Forced BOOT Mode == | == Forced BOOT Mode == | ||
| + | In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to luck of proper FW. In this cases, to recover CoolMasterNet, it has to be updated via forced BOOT mode. | ||
| + | * Set all dip switches on R line to ON position (up). Do not change dip switches on P,Q,S lines | ||
[[File:CM5-dips-forced-boot.png|200px]] | [[File:CM5-dips-forced-boot.png|200px]] | ||
| + | * Power reset CoolMasterNet device. It will stay in BOOT mode. | ||
| + | * Run FW Update. | ||
| + | * After FW Update done restore R line dip switches and power reset CoolMasterNet. | ||
Revision as of 01:36, 2 May 2018
- Download and Install Cool Automation SW Package:
- Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:
| Image | Version | Date | Key Features | Status |
|---|---|---|---|---|
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.2/CM5-0.6.2.INC" download>CM5-0.6.2.INC</htmltag> | 0.6.2 | 01 May 2018 | Fixes, MD,ME,LG Locks, FJ V1 support, FJ modes improvements, KNX VAM support, HH support | Stable |
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.0/CM5-0.6.0.INC" download>CM5-0.6.0.INC</htmltag> | 0.6.0 | 01 Nov 2017 | Fixes, Improvements, Features, Gree GMV5 support, Touch screen GUI for Network setup | Stable |
- Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed
- Run CoolAutomation Firmware Updater
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to luck of proper FW. In this cases, to recover CoolMasterNet, it has to be updated via forced BOOT mode.
- Set all dip switches on R line to ON position (up). Do not change dip switches on P,Q,S lines
- Power reset CoolMasterNet device. It will stay in BOOT mode.
- Run FW Update.
- After FW Update done restore R line dip switches and power reset CoolMasterNet.
