Difference between revisions of "CoolMasterNet FW Update"
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
== Forced BOOT Mode == | == Forced BOOT Mode == | ||
| − | In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to luck of proper FW. In this | + | In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode. |
| − | * Set all dip switches on R line to ON position (up). Do not change dip switches on P,Q,S lines | + | * Set all dip switches on R line to ON position (up). Store previous status of R dip switches. Do not change dip switches on P,Q,S lines |
[[File:CM5-dips-forced-boot.png|200px]] | [[File:CM5-dips-forced-boot.png|200px]] | ||
| − | * Power reset CoolMasterNet device. It will stay in BOOT mode. | + | * Power reset CoolMasterNet device. It will stay in forced BOOT mode. |
* Run FW Update. | * Run FW Update. | ||
| − | * After FW Update done restore R line dip switches and power reset CoolMasterNet. | + | * After FW Update done, restore R line dip switches and power reset CoolMasterNet. |
Revision as of 01:38, 2 May 2018
- Download and Install Cool Automation SW Package:
- Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:
| Image | Version | Date | Key Features | Status |
|---|---|---|---|---|
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.2/CM5-0.6.2.INC" download>CM5-0.6.2.INC</htmltag> | 0.6.2 | 01 May 2018 | Fixes, MD,ME,LG Locks, FJ V1 support, FJ modes improvements, KNX VAM support, HH support | Stable |
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.0/CM5-0.6.0.INC" download>CM5-0.6.0.INC</htmltag> | 0.6.0 | 01 Nov 2017 | Fixes, Improvements, Features, Gree GMV5 support, Touch screen GUI for Network setup | Stable |
- Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed
- Run CoolAutomation Firmware Updater
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.
- Set all dip switches on R line to ON position (up). Store previous status of R dip switches. Do not change dip switches on P,Q,S lines
- Power reset CoolMasterNet device. It will stay in forced BOOT mode.
- Run FW Update.
- After FW Update done, restore R line dip switches and power reset CoolMasterNet.
