Difference between revisions of "CoolMasterNet FW Update"
Jump to navigation
Jump to search
| Line 31: | Line 31: | ||
* Load FW Image | * Load FW Image | ||
* Click Update Firmware | * Click Update Firmware | ||
| − | [[File: | + | [[File:FW_Updater.png]] |
== Forced BOOT Mode == | == Forced BOOT Mode == | ||
Revision as of 02:33, 2 May 2018
Contents
Firmware update
- Download and Install Cool Automation SW Package:
CoolAutomation-180220_build_3.1.exe
- Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:
| Image | Version | Date | Key Features | Status |
|---|---|---|---|---|
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.2/CM5-0.6.2.INC" download>CM5-0.6.2.INC</htmltag> | 0.6.2 | 01 May 2018 | Fixes, MD,ME,LG Locks, FJ V1 support, FJ modes improvements, KNX VAM support, HH support | Stable |
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.0/CM5-0.6.0.INC" download>CM5-0.6.0.INC</htmltag> | 0.6.0 | 01 Nov 2017 | Fixes, Improvements, Features, Gree GMV5 support, Touch screen GUI for Network setup | Stable |
- Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed
- Run CoolAutomation Firmware Updater
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.
- Set all dip switches on R line to ON position (up). Store previous status of R dip switches. Do not change dip switches on P,Q,S lines
- Power reset CoolMasterNet device. It will stay in forced BOOT mode.
- Run FW Update.
- After FW Update done, restore R line dip switches and power reset CoolMasterNet.
