Difference between revisions of "CoolMasterNet FW Update"
Jump to navigation
Jump to search
| Line 36: | Line 36: | ||
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode. | In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode. | ||
| − | * Set all dip switches on R line | + | * Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines |
[[File:CM5-dips-forced-boot.png|200px]] | [[File:CM5-dips-forced-boot.png|200px]] | ||
* Power reset CoolMasterNet device. It will stay in forced BOOT mode. | * Power reset CoolMasterNet device. It will stay in forced BOOT mode. | ||
* Run FW Update. | * Run FW Update. | ||
* After FW Update done, restore R line dip switches and power reset CoolMasterNet. | * After FW Update done, restore R line dip switches and power reset CoolMasterNet. | ||
| + | |||
| + | == Safe Mode == | ||
| + | Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode. | ||
| + | * Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines | ||
| + | [[File:CM5-dips-safe-mode.png|200px]] | ||
| + | * Power reset CoolMasterNet device. It will stay in SAFE MODE. | ||
| + | * In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled. | ||
| + | * After configurations are done, restore Q line dip switches and power reset CoolMasterNet. | ||
Revision as of 02:14, 17 May 2018
Firmware update
- Download and Install Cool Automation SW Package:
CoolAutomation-180220_build_3.1.exe
- Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:
| Image | Version | Date | Key Features | Status |
|---|---|---|---|---|
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.2/CM5-0.6.2.INC" download>CM5-0.6.2.INC</htmltag> | 0.6.2 | 01 May 2018 | Fixes, MD,ME,LG Locks, FJ V1 support, FJ modes improvements, KNX VAM support, HH support | Stable |
| <htmltag tagname="a" href="http://coolautomation.com/lib/firmware/CMNET/0.6.0/CM5-0.6.0.INC" download>CM5-0.6.0.INC</htmltag> | 0.6.0 | 01 Nov 2017 | Fixes, Improvements, Features, Gree GMV5 support, Touch screen GUI for Network setup | Stable |
- Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed
- Run CoolAutomation FW Updater
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.
- Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines
- Power reset CoolMasterNet device. It will stay in forced BOOT mode.
- Run FW Update.
- After FW Update done, restore R line dip switches and power reset CoolMasterNet.
Safe Mode
Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode.
- Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines
- Power reset CoolMasterNet device. It will stay in SAFE MODE.
- In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.
- After configurations are done, restore Q line dip switches and power reset CoolMasterNet.
