Difference between revisions of "CoolPlug FW Update"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
* Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support | * Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support | ||
* Connect CoolPlug to USB. If it is first time connection, USB driver will be installed | * Connect CoolPlug to USB. If it is first time connection, USB driver will be installed | ||
| − | [[File:CoolPlug-USB-prog-connection.png]] | + | [[File:CoolPlug-USB-prog-connection.png|450px]] |
* Run '''CoolAutomation FirmWare Update''' tool | * Run '''CoolAutomation FirmWare Update''' tool | ||
* Load FW Image | * Load FW Image | ||
Revision as of 05:54, 23 November 2018
Contents
Firmware update
- Download and Install Cool Automation SW Package:
CoolAutomation-180220_build_3.1.exe
- Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support
- Connect CoolPlug to USB. If it is first time connection, USB driver will be installed
- Run CoolAutomation FirmWare Update tool
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode
- Disconnect CoolPlug from HVAC line and/or USB
- Press and hold CoolPlug button
- While pressing on button connect USB
In BOOT mode CoolPlug has a blue LED constantly ON.
