Difference between revisions of "CoolPlug FW Update"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
== Firmware update == | == Firmware update == | ||
* Download and Install '''CoolAutomation SW Package''': | * Download and Install '''CoolAutomation SW Package''': | ||
| − | [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation- | + | [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-181108_build_3.5.exe CoolAutomation-181108_build_3.5.exe] |
| + | |||
* Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support | * Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support | ||
* Connect CoolPlug to USB. If it is first time connection, USB driver will be installed | * Connect CoolPlug to USB. If it is first time connection, USB driver will be installed | ||
Revision as of 21:48, 1 February 2019
Contents
Firmware update
- Download and Install CoolAutomation SW Package:
CoolAutomation-181108_build_3.5.exe
- Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support
- Connect CoolPlug to USB. If it is first time connection, USB driver will be installed
- Run FirmwareUpdate tool
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode
- Disconnect CoolPlug from HVAC line and/or USB
- Press and hold CoolPlug button
- While pressing on button connect USB
In BOOT mode CoolPlug has a blue LED constantly ON.
