Difference between revisions of "CoolPlug FW Update"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode | In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode | ||
* Disconnect CoolPlug from HVAC line and/or USB | * Disconnect CoolPlug from HVAC line and/or USB | ||
| − | * Press and hold CoolPlug button | + | * Press and hold CoolPlug button |
* While pressing on button connect USB | * While pressing on button connect USB | ||
| − | In BOOT mode CoolPlug | + | In BOOT mode CoolPlug a blue LED will be constantly ON. |
Revision as of 02:25, 24 February 2019
Contents
Firmware update
- Download and Install CoolAutomation SW Package:
CoolAutomation-181108_build_3.5.exe
- Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support
- Connect CoolPlug to USB. If it is first time connection, USB driver will be installed
- Run FirmwareUpdate tool
- Load FW Image
- Click Update Firmware
Forced BOOT Mode
In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode
- Disconnect CoolPlug from HVAC line and/or USB
- Press and hold CoolPlug button
- While pressing on button connect USB
In BOOT mode CoolPlug a blue LED will be constantly ON.
