Difference between revisions of "CoolMasterNet FW Update"

From CoolAutomation Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__FORCETOC__
 
__FORCETOC__
 
== Firmware update ==
 
== Firmware update ==
−
* Download and Install [https://coolautomation.com/wp-content/uploads/sites/2/2021/01/CoolAutomation-build_6.04.exe '''CoolAutomation SW Package''']
+
* Download and Install [https://support.coolautomation.com/hc/en-us/articles/5139558696733-CoolAutomation-ToolBox '''CoolAutomation ToolBox''']
−
* Get CoolMasterNet FW Image. Latest FW Image can be downloaded here:
 
−
{| class="wikitable"
 
−
|-
 
−
! Image
 
−
! Version
 
−
! Date
 
−
! Key Features
 
−
! Status
 
−
|-
 
−
| [https://drive.google.com/file/d/1IKo3Z4FnB6j84SKZPy1X7jeEyWLnRDSD/view?usp=sharing CM5-0.9.4.INC]<br>[https://drive.google.com/file/d/1xvJvbLRkDMwH5gy-0P71mquNQEKOGFyd/view?usp=sharing CM5-0.9.4.IN2]
 
−
| 0.9.4
 
−
| 04 Apr 2022
 
−
| Sensors, BlueStar, Carrier Midea, Extended Service compatibility, Fixes, Improvements 
 
−
| '''Stable'''
 
−
|-
 
−
| [http://coolautomation.com/lib/firmware/CMNET/0.7.8/CM5-0.7.8.INC CM5-0.7.8.INC]
 
−
| 0.7.8
 
−
| 16 Apr 2019
 
−
| Aserver password, AUX, GPIO Inhibit, Breezart, Fixes, Improvements
 
−
| '''Stable'''
 
−
|-
 
−
|}
 
−
<br>
 
−
* Connect CoolMasterNet to USB. If it is the first time connection, USB driver will be installed
 
−
[[File:CM5-USB-prog-connection.png]]
 
−
* Run '''CoolAutomation FW Updater'''
 
−
* Load FW Image
 
−
* Click Update Firmware
 
−
[[File:FW_Updater.png]]
 
  
 
== Forced BOOT Mode ==
 
== Forced BOOT Mode ==

Latest revision as of 23:44, 26 October 2024

Firmware update

Forced BOOT Mode

In certain situations, like for instance in case of power outage during regular FW update, CoolMasterNet can become irresponsible due to a luck of proper FW. In this case, to recover CoolMasterNet, it has to be updated via forced BOOT mode.

  • Set all dip switches on R line into ON position (up). Remember previous status of R dip switches. Do not change dip switches on P,Q,S lines

CM5-dips-forced-boot.png

  • Power reset CoolMasterNet device. It will stay in forced BOOT mode.
  • Run FW Update.
  • After the FW Update is done, restore R line dip switches and power reset CoolMasterNet.

Safe Mode

Sometimes due to wrong configurations made in CoolMasterNet it can become irresponsible. In this case CoolMasterNet can be powered up in Safe Mode.

  • Set all dip switches on Q line into ON position (up). Remember previous status of Q dip switches. Do not change dip switches on P,R,S lines

CM5-dips-safe-mode.png

  • Power reset CoolMasterNet device. It will stay in SAFE MODE.
  • In Safe Mode CoolMasterNet can interface via RS232 or USB connection only. ETH and HVAC Lines are disabled.
  • After configurations are done, restore Q line dip switches and power reset CoolMasterNet.
Retrieved from "http://www.coolautomation.wiki/index.php?title=CoolMasterNet_FW_Update&oldid=767"