CoolPlug FW Update

From CoolAutomation Wiki
Revision as of 05:49, 23 November 2018 by Xol (talk | contribs) (Created page with "__FORCETOC__ == Firmware update == * Download and Install '''Cool Automation SW Package''': [http://coolautomation.com/lib/utilities/update-utility/CoolAutomation-180220_build...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Firmware update

  • Download and Install Cool Automation SW Package:

CoolAutomation-180220_build_3.1.exe

  • Get CoolPlug FW Image. Latest FW Image can be requested from CoolAutomation support.


  • Connect CoolPlug to USB. If it is the first time connection, USB driver will be installed

CoolPlug-USB-prog-connection.png

  • Run CoolAutomation FirmWare Update tool
  • Load FW Image
  • Click Update Firmware

FW Updater.png

Forced BOOT Mode

In certain situations, like for instance in case of power outage during regular FW update, CoolPlug can become irresponsible due to a luck of proper FW. In this case, to recover CoolPlug, it has to be updated via forced BOOT mode. To enter forced BOOT mode

  • Disconnect CoolPlug from HVAC line and/or USB
  • Press and hold CoolPlug button
  • While pressing on button connect USB

In BOOT mode CoolPlug has a blue LED constantly ON.

Retrieved from "http://www.coolautomation.wiki/index.php?title=CoolPlug_FW_Update&oldid=486"