Gree

From CoolAutomation Wiki
Revision as of 00:35, 12 September 2015 by Xol (talk | contribs) (Created page with "== Connection to Gree VRF System == CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Connection to Gree VRF System

CoolMasterNet should be connected in the same way as original Gree Communication Module like ME30-00/E2 or ME30-24/E2(M). Connection can be done:

  • On Outdoor Unit. On Outdoor PCB there are special connectors for Outdoor-Indoor(s) wiring and Communication Module connection. Connectors can be 3 or 4 pins wide, usually marked as -- A B --. Try to find cable going from Outdoor to Indoor(s). The signal wires in this cable are usually BROWN and ORANGE. Near the connector of these cable on Outdoor PCB where should similar free connector that can be used for CoolMasterNet.
Retrieved from "http://www.coolautomation.wiki/index.php?title=Gree&oldid=41"