CM5-LCD::Temperature Limitation

From CoolAutomation Wiki
Revision as of 01:58, 15 October 2020 by EduardF (talk | contribs)
Jump to navigation Jump to search
  • Select the zone by pressing on the relevant line

CM5-LCD-Temp-Limit-1.png

  • Press on the temperature icon (bottom right corner)

CM5-LCD-Temp-Limit-2.png

  • Enable Cool/Heat by setting the slider to “ON” position

CM5-LCD-Temp-Limit-3.png

  • Set temperature limits and press "Apply" (to set it to this zone only) or "Apply to L1" (to set it to all zones connected to L1)

CM5-LCD-Temp-Limit-4.png

Retrieved from "http://www.coolautomation.wiki/index.php?title=CM5-LCD::Temperature_Limitation&oldid=646"