CM5-LCD::Locks

From CoolAutomation Wiki
Revision as of 02:02, 18 October 2020 by EduardF (talk | contribs) (Created page with "* Select HVAC Line you want to configure File:CM5-LCD-HVAC_Lines1.png File:CM5-LCD-HVAC_Lines2.png<br><br> * Configure Master/Slave, Scan, DC Out File:CM5-LCD-L1.pn...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Select HVAC Line you want to configure

CM5-LCD-HVAC Lines1.png CM5-LCD-HVAC Lines2.png

  • Configure Master/Slave, Scan, DC Out

CM5-LCD-L1.png
DC Out configuration is available for lines L1 and L2 only. If DC Out is enabled corresponding DIP switches must be set as well.

  • Configure HVAC Line Type

CM5-LCD-L1-Unused-Rst.png CM5-LCD-L1-DK-Rst.png CM5-LCD-L1-ME-Wrong DIP.png
After changing HVAC Line type make sure to properly configure related DIP switches

Retrieved from "http://www.coolautomation.wiki/index.php?title=CM5-LCD::Locks&oldid=658"