Wireless-Wired Interoperability in CoolPlug

From CoolAutomation Wiki
Revision as of 05:10, 14 March 2022 by Xol (talk | contribs)
Jump to navigation Jump to search

Starting from FW version 0.1.8, CoolPlug can work simultaneously or separately in Wired or Wireless modes of connection to CooLinkHub or other devices. For Wireless connection CoolPlug has to be equipped with Wireless Module. Wired connection is available in all CoolPlugs via PBUS terminals.

Default lines configuration for CoolPlug

>line

 L1: M1M2 Master U00/G00 Not Connected

  Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L2: PB Address:0xDB(219) 9600_8N1

  Tx:29/29 Rx:56/56 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L3: Unused

  Tx:0/0 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L4: MAC A:Master U00/G00 Not Connected NVDB

  Tx:6/6 Rx:0/0 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

 L5: PBWi myid:006

  Tx:11/11 Rx:13/13 TO:0/0 CS:0/0 Col:0/0 NAK:0/0

OK


>modbus IP enable
OK, Boot Required!
>

Retrieved from "http://www.coolautomation.wiki/index.php?title=Wireless-Wired_Interoperability_in_CoolPlug&oldid=703"